Биореакторы-ферментеры из нержавеющей стали

12-Двойное механическое уплотнение Производственная система ферментации

The bottom agitation bioreactor

  • Описание
  • Конкурентное преимущество
  • Характеристики
  • Написать



Reqirements and manufacturers

5L 50L 500L



Fermenter body

The size of fermenter takes in general use type as basis and The main material of the fermenter is made by 316L stainless steel. The design pressure: P(inside)=0.3Mpa,P(interlayer)= 0.3Mpa, The polishing precision: Ra0.4~0.6, the ratio between diameter and height: 1:2.5
5 liter fermenter Work volumes ranging from 2-3.5 Liters
50 liter fermenter Work volumes ranging from 20-35 Liters
500 liter fermenter Work volumes ranging from 200-500 Liters

Метод стерилизации

Auto sterilization

Система перемешивания

Mechanical sealing system at the top of the fermenter; high-powered stirring oar, antifoam oar; AC electrical machine(SEW): infinite speed variation;rpm in the 500L germ fermenter: 70~400rpm±1%rpm;, The height of the stirring oar can be adjusted, too.

Обнаружение и контроль температуры

Heat by thermostatic water tank and circulate by circulating pump(Grundfos, Denmark), autocontrol (cooling water+5℃)~70℃±0.1℃,temperature probe(imported)

Определение и контроль pH

2.00-12.00±0.05pH, autocontrol by adding acid and base, pH sensor (Hamilton /Mettler,Switzerland) and shielding lead (Hamilton /Mettler, Switzerland).

Обнаружение и контроль DO

0-150±3% displaying precision 0.1%, sensor (Hamilton /Mettler, Switzerland) and shielding lead(Hamilton /Mettler, Switzerland)

Контроль подачи

ферментер использует перистальтический насос (более длинный) для добавления материалов

Противопенный контроль

Протестировано компанией sencor с добавлением пеногасителя перистальтическим насосом

Aeration detection and control

manual control ventilatory capacity, the precision of nhaler : 0.1μ, displayed by rotameter. The range of flow adjusting of 10000L germ fermenter :0~20000L/min

обнаружение и контроль давления

Manual control exhaust by diaphragm cell valve,and displayed by pressure gauge.

Pipeline and valve

The pipelines and valves which are in contact with the zymotic fluid are made by 316L stainless steel, the valves are diaphragm cell valves

Система контроля

BLBIO S Control System: on-site controller, the next crew for the Siemens S7-200 series PLC control system, it is a mature, stable, universal type of PLC, to suit a variety of automation applications, especially in manufacturing process control Application. Its modular, easy to implement distributed configuration and easy to master and so on, Siemens PLC control center has become a biological reaction process control implementation is economical and advanced control system, the system uses the touch screen display, on-site direct operations (menu type), all English menu and interface; also with the host computer for data transmission, data sampling and display tank, the system view of data analysis, reading settings.
10-inch LCD touch-sensitive screen as the display screen to display complete content-rich, user-friendly screen is simple, easy to operate. And disturbing each other. The control system can adapt to different range of sensors and actuators the output of the input signal with the signal anti-jamming system.
Software: Siemens S7+ FORCE CONTORL
Data collection and control module: Siemens S200 PLC controller and data collection and control module
1. Контроль
① Manual control: You can set the percentage of open valve or a valve opening ② automatic control mode: You can select continuous or PID PID control the switch ③ sequence control: the control of all parameters can be pre-set at least 10 control section, ④ for automatic segmentation remotely control: PC control ⑤ acceptable correlation control: the dissolved oxygen can select speed, air flow rate, tank pressure, control of feeding, etc.; pH can choose to control with acid and alkali
2. Measurement function: can feeding, bubble enemy, such as measurement of pH
3. XY-axis to chart real progress can be any expansion and contraction of graphics display, to help the operator determine the parameters of the interaction between the effects of the fermentation process to quickly modify and adjust
Обработка данных 4.
1) to show that all the parameters of the trend curve analysis
2) to store, display, analyze all the historical curve parameters
3) can display all the parameters of the batch report
4) copy the data directly with the USB
5) data storage format is compatible with EXCEL, EXCEL platform can be to deal with
5. Controller self-protection function: to set the password, others can not modify the fermentation parameters; and the controller is not lost due to power settings for each parameter
6. Can the process control parameters, each parameter can have 10 block can be set
7. Time display of each parameter recording interval can be adjusted
8. Two parameters can be carried out with the screen settings and calibration
9. show the controller is really running against, the panel instructed the state process system, process hardware, and motion status indicator for understanding the various devices (such as peristaltic pumps, circulating pumps, heating, mixing, etc.) work status, Fault identification can be used as display
10. Each parameter of the transmission are independent modules, without disturbing each other, for easy maintenance
11.PH, DO and other parameters of control and associated controls can be adjusted

PС программное обеспечение


BLBIO-Ver8.0 is a data recording and processing as one of the fermentation of special packages, with the English operation interface, data storage and backup, curve analysis, report generation analysis, anomaly analysis, for the fermentation and production process control and data processing bring a lot of convenience.
Основные характеристики:
1. Can record the fermentation time, temperature, pH, dissolved oxygen, rotational speed, air flow, pressure, fill quantity, the amount of foam enemy, acid dosage
2. Can be sent under the controlled variable settings and control parameters, remote operation
3. Can be set sequence control
4. Can type off-line parameters, and records show
5. Trend curve, historical curve shows can display 1-10 (any setting) curve;
- You can select a different start time and the time period (8,24,48,72,96 and 144 hours);
- You can set the upper and lower curves show, in order to improve display resolution;
- You can choose any of several different batches (1-10) curve also shows that for comparative analysis;
- and Y-axis parallel to the secant by the mouse to drag the reading, followed by curve data is activated, the fermentation time (X axis) and the same time the data curve with the secant movement changes;
6. Report Printing
- can show significant 1-12 (any set) data, and print output;
- You can select a different start time and the time and can choose different time intervals (1,5,15,30,60 minutes);
- You can choose any of several different batches (any set) data, and print output,
- To comparative analysis;
7. curve printing
- You can show the curve was printed by color printer;
EXCEL platform can also be carried out in data processing and printing, is very convenient.

Конкурентное преимущество

Technical parameter:Material and brand of key components

Ключевые компоненты

Материал и марка


Система сосудов

В цилиндре, разработанном нашей компанией, используется нержавеющая сталь.


Скорость двигателя



Регулятор скорости

Фудзи, Япония


Соленоидный клапан



Фильтр аэрации

0.2 мкм, Доминика Великобритания


Дыхательный фильтр

0.2 мкм, SARTORIUS, Германия


pH электрод

Гамильтон / Меттлер-Толедо, Швейцария


DO электрод

Гамильтон / Меттлер-Толедо, Швейцария


Список необязательной конфигурации
1 Система автоматического открывания крышки бака. (Автоматический подъемник крышки)
2 Система донной подачи и перемещения резервуара
3 Двойное механическое уплотнение - Двойная защита
4 Регулятор давления
5 Двойная торцевая поверхность и система охлаждающей смазки
6 Инактивированная выхлопная система
7 Эффект перемешивания
8 Тепловой массовый расходомер
9 Система взвешивания с балансировкой
10 Модуль взвешивания цистерн-меттлер
11 Siemens PLC, промежуточное звено Schneider



Для культивирования клеток, бактерий, микробной ферментации и т. Д.
ПОСЛ. основные черты
1 Полностью автоматическая система оборудования, включая автоматическую очистку (CIP), автоматическую стерилизацию (SIP)
2 Гибкая и модульная система,удобное программное обеспечение, простота эксплуатации
3 Обладая богатым опытом для клиентов из разных стран, со зрелым стандартным дизайном и оптимизированным индивидуальным дизайном
4 Экономичный выбор и гарантия бесперебойной работы и глобальный
5 Эффективная сервисная поддержка и наличие запасных частей для зарубежного и внутреннего рынка


Тип BLBIO-5/7 / 10SJ BLBIO-20/30/50 BLBIO-100/150 / 200SJ BLBIO-250/300 / 500SJ
Общий объем 5/7/10 20/30/50 100/150/200 250/300/500
Максимальная загрузка Количество жидкости 4/5/8 16/21/40 70/120/160 200/210/400
Материалы 316L stainless steel
Методы перемешивания the magnetic structure and top driven by the mechanical coupling
Базовая конфигурация (необязательно) температура, частота вращения, pH, растворенный раствор, пеногаситель, подача, аэрация (вручную), давление (вручную), глоток
Расширяемая конфигурация (необязательно) Liquid level control, feed weighing system, multifeeds & online testing of the content of methanol and ethanol, detection of O2 & CO2 exhausts
Система контроля BLBIO-B. C. S BIO-Process controller
Электроэнергия 220V 2KW 220V 3KW 380V 6KW 380V 8KW
Размеры (Д * Ш * В) 890 * 660 * 1600 1300 * 790 * 1700 1400 * 820 * 2200 2000 * 1500 * 2800
Вес нетто (кг) 120 150 250 400
Количество пара для стерилизации 220V 3-6KW 380V 9-12KW 380V 18-24KW 380V 36-45KW

Связаться с нами


' + info + '
'; } else { var div = '

I am sorry!

' + info + '
'; } $(".mask").show(); $(".inqueryfrom").hide(); $(".box").empty(); $(".box").append(div); $(".box").show(); } function closediv(div) { $("#" + div).hide(); }

Следуйте за нами

Copyright © 2016-2020 Knik Technology. Все права защищены.