Roostevabast terasest bioreaktorid-fermentaatorid

12-topelt mehaaniline tihend Tootmise kääritamise süsteem

The bottom agitation bioreactor

  • Kirjeldus
  • Konkurentsieelis
  • tehnilised nõuded
  • Küsitlus



Reqirements and manufacturers

5L 50L 500L



Fermenter body

The size of fermenter takes in general use type as basis and The main material of the fermenter is made by 316L stainless steel. The design pressure: P(inside)=0.3Mpa,P(interlayer)= 0.3Mpa, The polishing precision: Ra0.4~0.6, the ratio between diameter and height: 1:2.5
5 liter fermenter Work volumes ranging from 2-3.5 Liters
50 liter fermenter Work volumes ranging from 20-35 Liters
500 liter fermenter Work volumes ranging from 200-500 Liters

Steriliseerimise meetod

Auto sterilization


Mechanical sealing system at the top of the fermenter; high-powered stirring oar, antifoam oar; AC electrical machine(SEW): infinite speed variation;rpm in the 500L germ fermenter: 70~400rpm±1%rpm;, The height of the stirring oar can be adjusted, too.

Temperatuuri tuvastamine ja reguleerimine

Heat by thermostatic water tank and circulate by circulating pump(Grundfos, Denmark), autocontrol (cooling water+5℃)~70℃±0.1℃,temperature probe(imported)

pH tuvastamine ja kontroll

2.00-12.00±0.05pH, autocontrol by adding acid and base, pH sensor (Hamilton /Mettler,Switzerland) and shielding lead (Hamilton /Mettler, Switzerland).

DO tuvastamine ja kontroll

0-150±3% displaying precision 0.1%, sensor (Hamilton /Mettler, Switzerland) and shielding lead(Hamilton /Mettler, Switzerland)


fermentaator kasutab mõõteseadmete lisamiseks peristaltilist pumpa (Pikem)


Testitud sencor abil ja lisatud peristaltilise pumba abil vahutamisvastast ainet

Aeration detection and control

manual control ventilatory capacity, the precision of nhaler : 0.1μ, displayed by rotameter. The range of flow adjusting of 10000L germ fermenter :0~20000L/min

rõhu tuvastamine ja juhtimine

Manual control exhaust by diaphragm cell valve,and displayed by pressure gauge.

Pipeline and valve

The pipelines and valves which are in contact with the zymotic fluid are made by 316L stainless steel, the valves are diaphragm cell valves


BLBIO S Control System: on-site controller, the next crew for the Siemens S7-200 series PLC control system, it is a mature, stable, universal type of PLC, to suit a variety of automation applications, especially in manufacturing process control Application. Its modular, easy to implement distributed configuration and easy to master and so on, Siemens PLC control center has become a biological reaction process control implementation is economical and advanced control system, the system uses the touch screen display, on-site direct operations (menu type), all English menu and interface; also with the host computer for data transmission, data sampling and display tank, the system view of data analysis, reading settings.
10-inch LCD touch-sensitive screen as the display screen to display complete content-rich, user-friendly screen is simple, easy to operate. And disturbing each other. The control system can adapt to different range of sensors and actuators the output of the input signal with the signal anti-jamming system.
Software: Siemens S7+ FORCE CONTORL
Data collection and control module: Siemens S200 PLC controller and data collection and control module
1. Kontroll
① Manual control: You can set the percentage of open valve or a valve opening ② automatic control mode: You can select continuous or PID PID control the switch ③ sequence control: the control of all parameters can be pre-set at least 10 control section, ④ for automatic segmentation remotely control: PC control ⑤ acceptable correlation control: the dissolved oxygen can select speed, air flow rate, tank pressure, control of feeding, etc.; pH can choose to control with acid and alkali
2. Measurement function: can feeding, bubble enemy, such as measurement of pH
3. XY-axis to chart real progress can be any expansion and contraction of graphics display, to help the operator determine the parameters of the interaction between the effects of the fermentation process to quickly modify and adjust
4. Andmetöötlus
1) to show that all the parameters of the trend curve analysis
2) to store, display, analyze all the historical curve parameters
3) can display all the parameters of the batch report
4) copy the data directly with the USB
5) data storage format is compatible with EXCEL, EXCEL platform can be to deal with
5. Controller self-protection function: to set the password, others can not modify the fermentation parameters; and the controller is not lost due to power settings for each parameter
6. Can the process control parameters, each parameter can have 10 block can be set
7. Time display of each parameter recording interval can be adjusted
8. Two parameters can be carried out with the screen settings and calibration
9. show the controller is really running against, the panel instructed the state process system, process hardware, and motion status indicator for understanding the various devices (such as peristaltic pumps, circulating pumps, heating, mixing, etc.) work status, Fault identification can be used as display
10. Each parameter of the transmission are independent modules, without disturbing each other, for easy maintenance
11.PH, DO and other parameters of control and associated controls can be adjusted

PC software


BLBIO-Ver8.0 is a data recording and processing as one of the fermentation of special packages, with the English operation interface, data storage and backup, curve analysis, report generation analysis, anomaly analysis, for the fermentation and production process control and data processing bring a lot of convenience.
Peamised omadused:
1. Can record the fermentation time, temperature, pH, dissolved oxygen, rotational speed, air flow, pressure, fill quantity, the amount of foam enemy, acid dosage
2. Can be sent under the controlled variable settings and control parameters, remote operation
3. Can be set sequence control
4. Can type off-line parameters, and records show
5. Trend curve, historical curve shows can display 1-10 (any setting) curve;
- You can select a different start time and the time period (8,24,48,72,96 and 144 hours);
- You can set the upper and lower curves show, in order to improve display resolution;
- You can choose any of several different batches (1-10) curve also shows that for comparative analysis;
- and Y-axis parallel to the secant by the mouse to drag the reading, followed by curve data is activated, the fermentation time (X axis) and the same time the data curve with the secant movement changes;
6. Report Printing
- can show significant 1-12 (any set) data, and print output;
- You can select a different start time and the time and can choose different time intervals (1,5,15,30,60 minutes);
- You can choose any of several different batches (any set) data, and print output,
- To comparative analysis;
7. curve printing
- You can show the curve was printed by color printer;
EXCEL platform can also be carried out in data processing and printing, is very convenient.


Technical parameter:Material and brand of key components



Materjal ja bränd


Laevade süsteem

The cylinder designed by our company uses stainless steel





Kiiruse regulaator

Fuji, Japan






0.2μm, Dominica United Kingdom



0.2μm, SARTORIUS, Germany



Hamilton / Mettler-Toledo, Šveits


TEE elektrood

Hamilton / Mettler-Toledo, Šveits


Valikuline konfiguratsiooniloend
1 Paagi kork avab automaatselt süsteemi (automaatne kaane tõstja)
2 Paagi põhja etteande ja teisaldamise süsteem
3 Topeltmehaaniline tihend - topeltkaitse
4 Rõhuregulaator
5 Topeltpinna ja jahutussõlmesüsteem
6 Inaktiveeritud väljalaskesüsteem
7 Segamise mõju
8 Termilise massivoolumõõturi
9 Kaalude tasakaalusöötmine
10 Paagi kaalumismoodul-mettler
11 Siemens PLC, Schneideri vahetooted


tehnilised nõuded

Rakkude kasvatamiseks, bakteriteks, mikroobide fermentatsiooniks jne.
SEQ. põhijooned
1 Täisautomaatne varustus, sealhulgas automaatne puhastamine (CIP), automaatne steriliseerimine (SIP)
2 Paindlik ja modulaarselt loodud süsteem,kasutajasõbralik tarkvara, kasutusmugavus
3 Rikkaliku kogemusega klientidele erinevatest riikidest, kellel on küps standardkujundus ja optimeeritud kohandatud disain
4 Ökonoomne valik ja probleemideta toimimise tagamine ning ülemaailmne
5 Tõhus teenindus ja varuosade kättesaadavus välismaale ja siseturule


tüüp BLBIO-5/7/10SJ BLBIO-20/30/50 BLBIO-100/150/200SJ BLBIO-250/300/500SJ
Kogumaht 5 / 7 / 10 20 / 30 / 50 100 / 150 / 200 250 / 300 / 500
Maximum loading Amount of liquid 4 / 5 / 8 16 / 21 / 40 70 / 120 / 160 200 / 210 / 400
materjalid 316L stainless steel
Segamismeetodid the magnetic structure and top driven by the mechanical coupling
Basic Configuration (optional) temperature, RPM, PH, DO, antifoam,feed , aeration (manual), Pressure (manual), sip
Extensible Configuration (optional) Liquid level control, feed weighing system, multifeeds & online testing of the content of methanol and ethanol, detection of O2 & CO2 exhausts
Control System BLBIO-B. C. S BIO-Process controller
Elektrienergia 220V 2KW 220V 3KW 380V 6KW 380V 8KW
Mõõtmed (L * W * H) 890 * 660 * 1600 1300 * 790 * 1700 1400 * 820 * 2200 2000 * 1500 * 2800
Netokaal (kg) 120 150 250 400
The amount of steam for sterilization 220V 3-6KW 380V 9-12KW 380V 18-24KW 380V 36-45KW

Võta meiega ühendust


' + info + '
'; } else { var div = '

I am sorry!

' + info + '
'; } $(".mask").show(); $(".inqueryfrom").hide(); $(".box").empty(); $(".box").append(div); $(".box").show(); } function closediv(div) { $("#" + div).hide(); }
Autoriõigus © 2016-2020 Knik Technology Kõik õigused kaitstud.