Custom Fermentor Systems-tank manufacturers

Item

Description

3000L

fermenter

Fermenter body

The size of fermenter takes in general use type as basis and The main material of the fermenter is made by 316L stainless steel. The design pressure: P(inside)= 0.3Mpa, P(interlayer)= 0.3Mpa, The polishing precision: Ra0.4~0.6, the ratio between diameter and height: 1:2.5

3000 liter fermenter Work volumes ranging from 1000-2400 Liters

Sterilization method

Auto Sterilization(SIP)

Stirring system

Mechanical sealing system at the top of the fermenter; high-powered stirring oar, antifoam oar; AC electrical machine,

3000liter fermenterrpm: 50~500rpm±1%rpm;

Temperature detection and control

Heat by thermostatic water tank and circulate by circulating pump(Grundfos, Denmark), autocontrol (cooling water+5℃)~70℃±0.1℃,temperature probe(imported)

pH detection and control

2.00-12.00±0.05pH, autocontrol by adding acid and base, pH sensor (Switzerland) and shielding lead ( Switzerland).

DO detection and control

0-150±3% displaying precision 0.1%, sensor ( Switzerland) and shielding lead(Switzerland)

Feed control

3000L and 5000L

use Pneumatic diaphragm valve to add meterials

Antifoam control

Tested by sencor and added antifoamer by Pneumatic Diaphragm

Aeration detection and control

Manual control ventilatory capacity, the precision of inhaler: 0.1μ, displayed by rotameter.

3000liter fermenter range of flow adjusting :0~5000L/min

pressure detection and control

Auto control exhaust by diaphragm cell valve, and displayed by pressure gauge.

Pipeline and valve

The pipelines and valves which are in contact with the zymotic fluid are made by 316L stainless steel, the valves are diaphragm cell valves